probleme au boot

trazomtg
Messages : 131
Inscription : 19 juillet 2016, 13:27

probleme au boot

Message par trazomtg » 28 octobre 2018, 10:23

Bonjour,
j'ai un problème sur smon ordi DEll avec Centos7
j'ai ça avec dmesg :

Code : Tout sélectionner

[ 1854.785739] pcieport 0000:00:1c.5: AER: Corrected error received: 0000:00:1c.5
[ 1854.785752] pcieport 0000:00:1c.5: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
[ 1854.785763] pcieport 0000:00:1c.5:   device [8086:9d15] error status/mask=00001000/00002000
[ 1854.785771] pcieport 0000:00:1c.5:    [12] Replay Timer Timeout  
[ 1856.553647] pcieport 0000:00:1c.5: AER: Corrected error received: 0000:00:1c.5
[ 1856.553663] pcieport 0000:00:1c.5: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
[ 1856.553674] pcieport 0000:00:1c.5:   device [8086:9d15] error status/mask=00001000/00002000
[ 1856.553681] pcieport 0000:00:1c.5:    [12] Replay Timer Timeout 

Code : Tout sélectionner

 ACPI Error: No pointer back to namespace node in package 00000000b70d0133 (20180531/dsargs-303)
[   17.014467] ACPI Error: Method parse/execution failed \_SB.PCI0.B0D4.PPCC, AE_AML_INTERNAL (20180531/psparse-516)
[   17.014657] input: Intel HID events as /devices/platform/INT33D5:00/input/input9
[   17.322416] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[   17.322457] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[   17.375236] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[   17.551398] input: PC Speaker as /devices/platform/pcspkr/input/input10
[   17.588906] cdc_acm 1-9:1.0: ttyACM0: USB ACM device
[   17.588968] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   17.589034] sr 1:0:0:0: Attached scsi generic sg1 type 5
[   17.589070] usbcore: registered new interface driver cdc_acm
[   17.589071] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[   18.112283] videodev: Linux video capture interface: v2.00
[   18.382555] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[   18.402514] i2c_hid i2c-DELL0810:00: i2c-DELL0810:00 supply vdd not found, using dummy regulator
[   18.432245] input: DELL0810:00 044E:120A Mouse as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-6/i2c-DELL0810:00/0018:044E:120A.0002/input/input11
[   18.432428] input: DELL0810:00 044E:120A Touchpad as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-6/i2c-DELL0810:00/0018:044E:120A.0002/input/input12
[   18.432574] input: DELL0810:00 044E:120A as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-6/i2c-DELL0810:00/0018:044E:120A.0002/input/input13
[   18.432644] input: DELL0810:00 044E:120A as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-6/i2c-DELL0810:00/0018:044E:120A.0002/input/input14
[   18.432782] hid-generic 0018:044E:120A.0002: input,hidraw1: I2C HID v1.00 Mouse [DELL0810:00 044E:120A] on i2c-DELL0810:00
[   18.526846] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[   18.526851] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[   18.526853] RAPL PMU: hw unit of domain package 2^-14 Joules
[   18.526856] RAPL PMU: hw unit of domain dram 2^-14 Joules
[   18.526858] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[   18.526860] RAPL PMU: hw unit of domain psys 2^-14 Joules
[   18.582272] input: Dell WMI hotkeys as /devices/platform/PNP0C14:00/wmi_bus/wmi_bus-PNP0C14:00/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input15
[   18.664873] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[   18.682988] uvcvideo: Found UVC 1.00 device Integrated_Webcam_HD (1bcf:28c1)
[   18.700968] Bluetooth: Core ver 2.22
[   18.700991] NET: Registered protocol family 31
[   18.700992] Bluetooth: HCI device and connection manager initialized
[   18.700997] Bluetooth: HCI socket layer initialized
[   18.701011] Bluetooth: L2CAP socket layer initialized
[   18.701023] Bluetooth: SCO socket layer initialized
[   18.701612] input: Integrated_Webcam_HD: Integrate as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input16
[   18.701739] usbcore: registered new interface driver uvcvideo
[   18.701741] USB Video Class driver (1.1.1)
[   18.726416] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   19.004436] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[   19.004443] cfg80211: failed to load regulatory.db
[   19.052580] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[   19.640923] iTCO_vendor_support: vendor-support=0
[   19.643820] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[   19.643870] iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400)
[   19.644009] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   19.680401] cryptd: max_cpu_qlen set to 1000
[   19.682662] input: DELL0810:00 044E:120A Touchpad as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-6/i2c-DELL0810:00/0018:044E:120A.0002/input/input18
[   19.682985] hid-multitouch 0018:044E:120A.0002: input,hidraw1: I2C HID v1.00 Mouse [DELL0810:00 044E:120A] on i2c-DELL0810:00
[   19.787344] usbcore: registered new interface driver btusb
[   19.831246] ath10k_pci 0000:02:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[   19.931884] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[   19.931907] pcieport 0000:00:1c.5: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[   19.931920] pcieport 0000:00:1c.5:   device [8086:9d15] error status/mask=00000081/00002000
[   19.931942] pcieport 0000:00:1c.5:    [ 0] Receiver Error         (First)
[   19.931951] pcieport 0000:00:1c.5:    [ 7] Bad DLLP              
[   19.931963] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[   19.931976] pcieport 0000:00:1c.5: can't find device of ID00e5
[   19.931982] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[   19.931998] pcieport 0000:00:1c.5: can't find device of ID00e5
[   19.962425] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[   19.962439] pcieport 0000:00:1c.5: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[   19.962448] pcieport 0000:00:1c.5:   device [8086:9d15] error status/mask=00002001/00002000
[   19.962455] pcieport 0000:00:1c.5:    [ 0] Receiver Error         (First)
[   19.962464] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[   19.962474] pcieport 0000:00:1c.5: can't find device of ID00e5
[   20.178995] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC3246: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   20.179023] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   20.179028] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[   20.179032] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   20.179034] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   20.179040] snd_hda_codec_realtek hdaudioC0D0:      Headset Mic=0x19
[   20.179044] snd_hda_codec_realtek hdaudioC0D0:      Headphone Mic=0x1a
[   20.179050] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12
[   20.196199] AVX2 version of gcm_enc/dec engaged.
[   20.196200] AES CTR mode by8 optimization enabled
[   20.209022] alg: No test for pcbc(aes) (pcbc-aes-aesni)
[   20.243590] input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input21
[   20.243912] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input22
[   20.247435] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input23
[   20.247870] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input24
[   20.248188] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input25
[   20.248413] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input26
[   20.686860] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin
[   20.686866] Bluetooth: hci0: QCA: patch rome 0x302 build 0x138, firmware rome 0x302 build 0x111
[   20.715865] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin
[   20.758848] Adding 7864316k swap on /dev/mapper/centos_dell--centos-swap.  Priority:-2 extents:1 across:7864316k FS
[   21.085307] ath10k_pci 0000:02:00.0: qca9377 hw1.1 target 0x05020001 chip_id 0x003821ff sub 1028:1810
[   21.085315] ath10k_pci 0000:02:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 0 testmode 0
[   21.086729] ath10k_pci 0000:02:00.0: firmware ver WLAN.TF.1.0-00267-1 api 5 features ignore-otp crc32 79cea2c7
[   21.255512] ath10k_pci 0000:02:00.0: board_file api 2 bmi_id N/A crc32 8aedfa4a
[   21.351204] XFS (sda1): Mounting V5 Filesystem
[   21.695731] intel_pmc_core:  initialized
[   21.696664] XFS (sda1): Ending clean mount
[   21.747301] ath10k_pci 0000:02:00.0: htt-ver 3.1 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1
[   21.753541] ath: EEPROM regdomain: 0x6c
et ça avec la commande journalctl -xe

[code[root@dell-centos geanypy]# journalctl -xe
oct. 28 09:17:24 dell-centos kernel: pcieport 0000:00:1c.5: AER: Corrected error received: 0000:00:1c.5
oct. 28 09:17:24 dell-centos kernel: pcieport 0000:00:1c.5: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
oct. 28 09:17:24 dell-centos kernel: pcieport 0000:00:1c.5: device [8086:9d15] error status/mask=00001000/00002000
oct. 28 09:17:24 dell-centos kernel: pcieport 0000:00:1c.5: [12] Replay Timer Timeout
oct. 28 09:17:26 dell-centos kernel: pcieport 0000:00:1c.5: AER: Corrected error received: 0000:00:1c.5
oct. 28 09:17:26 dell-centos kernel: pcieport 0000:00:1c.5: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
oct. 28 09:17:26 dell-centos kernel: pcieport 0000:00:1c.5: device [8086:9d15] error status/mask=00001000/00002000
oct. 28 09:17:26 dell-centos kernel: pcieport 0000:00:1c.5: [12] Replay Timer Timeout
oct. 28 09:18:32 dell-centos kernel: pcieport 0000:00:1c.5: AER: Corrected error received: 0000:00:1c.5
oct. 28 09:18:32 dell-centos kernel: pcieport 0000:00:1c.5: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
oct. 28 09:18:32 dell-centos kernel: pcieport 0000:00:1c.5: device [8086:9d15] error status/mask=00001000/00002000
oct. 28 09:18:32 dell-centos kernel: pcieport 0000:00:1c.5: [12] Replay Timer Timeout
oct. 28 09:18:46 dell-centos kernel: pcieport 0000:00:1c.5: AER: Corrected error received: 0000:00:1c.5
oct. 28 09:18:46 dell-centos kernel: pcieport 0000:00:1c.5: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
oct. 28 09:18:46 dell-centos kernel: pcieport 0000:00:1c.5: device [8086:9d15] error status/mask=00001000/00002000
oct. 28 09:18:46 dell-centos kernel: pcieport 0000:00:1c.5: [12] Replay Timer Timeout
oct. 28 09:18:58 dell-centos kernel: pcieport 0000:00:1c.5: AER: Corrected error received: 0000:00:1c.5
oct. 28 09:18:58 dell-centos kernel: pcieport 0000:00:1c.5: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
oct. 28 09:18:58 dell-centos kernel: pcieport 0000:00:1c.5: device [8086:9d15] error status/mask=00001000/00002000
oct. 28 09:18:58 dell-centos kernel: pcieport 0000:00:1c.5: [12] Replay Timer Timeout
oct. 28 09:19:05 dell-centos kernel: pcieport 0000:00:1c.5: AER: Corrected error received: 0000:00:1c.5
oct. 28 09:19:05 dell-centos kernel: pcieport 0000:00:1c.5: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
oct. 28 09:19:05 dell-centos kernel: pcieport 0000:00:1c.5: device [8086:9d15] error status/mask=00001000/00002000
oct. 28 09:19:05 dell-centos kernel: pcieport 0000:00:1c.5: [12] Replay Timer Timeout
oct. 28 09:20:01 dell-centos systemd[1]: Started Session 6 of user root.
-- Subject: L'unité (unit) session-6.scope a terminé son démarrage
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/li ... temd-devel
--
-- L'unité (unit) session-6.scope a terminé son démarrage, avec le résultat done.
oct. 28 09:20:01 dell-centos systemd[1]: Starting Session 6 of user root.
-- Subject: L'unité (unit) session-6.scope a commencé à démarrer
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/li ... temd-devel
--
-- L'unité (unit) session-6.scope a commencé à démarrer.
oct. 28 09:20:01 dell-centos CROND[8491]: (root) CMD (/usr/lib64/sa/sa1 1 1)
oct. 28 09:20:45 dell-centos kernel: pcieport 0000:00:1c.5: AER: Corrected error received: 0000:00:1c.5
oct. 28 09:20:45 dell-centos kernel: pcieport 0000:00:1c.5: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
oct. 28 09:20:45 dell-centos kernel: pcieport 0000:00:1c.5: device [8086:9d15] error status/mask=00001000/00002000
oct. 28 09:20:45 dell-centos kernel: pcieport 0000:00:1c.5: [12] Replay Timer Timeout
oct. 28 09:21:02 dell-centos kernel: pcieport 0000:00:1c.5: AER: Corrected error received: 0000:00:1c.5
oct. 28 09:21:02 dell-centos kernel: pcieport 0000:00:1c.5: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
oct. 28 09:21:02 dell-centos kernel: pcieport 0000:00:1c.5: device [8086:9d15] error status/mask=00001000/00002000
oct. 28 09:21:02 dell-centos kernel: pcieport 0000:00:1c.5: [12] Replay Timer Timeout ][/code]

je n'ai pas trouvé de correction sur internet
merci pour votre aide

Beta-Pictoris
Messages : 1017
Inscription : 07 janvier 2014, 21:48
Localisation : Angers, France

Re: probleme au boot

Message par Beta-Pictoris » 28 octobre 2018, 11:41

Ces messages peuvent arriver quand certaines cartes pcie de ta machine ne peuvent pas passer en idle quand elles ne sont plus sollicitées.

Regarde ceci: https://wireless.wiki.kernel.org/en/use ... ation/ASPM

Regarde si tu peux modifier l'état de l'aspm dans le bios de ta machine.

Essaye de passer le paramètre "pcie_aspm=off" au noyau linux et regarde les logs.

Répondre